Short press on K3 key, machine shake once, machine stop recording and save the file. In standby mode, short press on K6, machine shake three times, blue and red light flash 4 times then go off, machine enter motion detecting standby mode.
Short press on K6, machine shake once, then stop recording and save automatically, then enter the standby mode. It will automatically install the drivers before using this function In shutdown condition, keep pressing on K4 till connect to computer and enter into PC camera.
Charging with an ac adapter via the usb extension cable, or connect to your pc directly. When the battery is fully charged, the blue light will be off. When battery in charging status, long press on K6 first, then press K6 again till the red light goes on, the machine will enter standby mode. Connect the machine to your computer, under the disk root directory, please creat a txt named 'TIME. When you complete the setting, please restart the camera, it will automatically complete the time revision.
And you can also use "WriteTime. Exe" file which stored in the machine to update the video time. I guess it does not work with HP laptop windows Product successfully added to your Shopping Cart.
Long press on K1, blue and red light will be on, at the same time machine shakes, when shaking stop, the initialization finished and the blue light go off ,red light keep on, machine enter standby mode. Long press on K1, machine shakes and red light flash 3 times to be shutdown. In standby mode, short press on K2 key, blue light go on, machine begin to be photographed and save the file. In standby mode, long press K2 key, machine shake twice, the red light flash 3 times then go off, it begin to recording, short press K2 key again ,machine shake once, it will stop recording and save the file, meanwhile the red light is on and the machine enter into the standby mode again.
In standby mode, short press on K1, machine shakes once and blue lights flash 3 times then go off, it starts to recording. Short press on K1 key, machine shake once, machine stop recording and save the file. In standby mode, short press on K3 , machine shake three times ,blue and red light flash 4 times then go off, machine enter motion detecting standby mode.
Short press on K3, machine shake once, then stop recording and save automatically, then enter the standby mode. Open the movable disk, there is a tag. TXT", then open it and set the time form. When you complete the setting, please restart the camera, it will automatically complete the time revision. When battery is low, the green light will flash about 3 seconds, tehn automatically saves the current image file and shutdown.
Because of accidental faulty operation or other special reasons, the camera stop work, please press K1 and K2 to restart the machine. Cannot connect computer: please confirm your operating system, driver, USB interface, connections are okay. Gunnar11 - Jan 03, pls, someone upload the driver, I did not get the driver CD. Ibr - Jan 03, I have a problem in the video is almost 40 seconds and then closes the device.
Just Me - Jan 03, If the light flashes many times on startup, the memory card is not fully seated. If you are experiencing problems with your webcam, then the article below will help you find if your problem is driver-related or not.
Start Download. Once you have the details you can search the manufacturers website for your drivers and, if available, download and install these drivers. If you are unsure of whether or not you need to update your Drivers, or indeed which Drivers may need to be updated, you can run a Drivers scan using a driver update tool you will need to pay to register this tool but usually the Drivers scan is free.
This will allow you to assess your Driver needs without any commitment. Alternatively, you can use the device manager to check if there are problems with any of your hardware devices. In many cases the answer to this is yes, however in some cases the manufacturers no longer make the Drivers available so you need to use a Driver Update Tool to install the missing Drivers.
The purpose of such as tool is to save you time and effort by automatically downloading and updating the Drivers for you.
0コメント